When it comes to optical fiber, I believe everyone will be familiar with it. The full name of optical fiber is optical fiber, which is made of glass or plastic and can be used as a tool for spreading light. It is now widely used in communication. With an understanding of fiber optics, it's obvious what din 41612 type g connectors are. As the name suggests, din 41612 type g connectors are devices that connect one optical fiber to another. It is a connection device that can be inserted and removed repeatedly between optical fibers, so it is also widely known as the optical fiber mobile connector.

Depending on the structure of their connectors, there are many types of din 41612 type g connectors, such as FC, SC, ST, LC, etc. However, the core components of all types of din 41612 type g connectors are the same, using high-precision components, namely two pins and a coupling tube, to achieve the alignment and connection of optical fibers.

The emergence of various types of din 41612 type g connectors solves the problem of fiber optic connectivity under different conditions. In order to adapt to a variety of environments, the performance characteristics of din 41612 type g connectors become important. For example, din 41612 type g connectors have specific requirements for optical performance, interchangeability, repeatability, tensile strength, temperature adaptability, etc. Among them, optical performance is the most important, which determines the transmission power of the fiber. As din 41612 type g connectors are passive and general-purpose devices, this requires that din 41612 type g connectors can be used in any combination and reused, That is, din 41612 type g connectors have better interchangeability and repeatability. In addition, there are industry requirements: the tensile strength of din 41612 type g connectors must be no less than 90N, and the normal service temperature range of din 41612 type g connectors must be between -40 ° C and 70 ° C.

After understanding the composition and key performance of din 41612 type g connectors, It is easy to think of the role of din 41612 type g connectors :din 41612 type g connectors realize the low loss connection of optical fibers and cables, which serves the impact of optical fiber connections on signals, so that our communication transmission can be effectively transmitted in different environments. The various types of din 41612 type g connectors meet our needs for different fibre optic connections.

Through the understanding of din 41612 type g connectors, we can see that din 41612 type g connectors have excellent performance and outstanding functions, and their application range will not only realize the connection of optical fibers, And has been widely used in optical fiber transmission line, optical fiber distribution frame, optical fiber test instrument. It is believed that the stage of din 41612 type g connectors will be wider in the near future.

Connection steps for din 41612 type g connectors

1. The Fiber Quick Connector is a very innovative field termination connector that contains factory pre-installed fiber, pre-polished ceramic ferries and mechanical connections.

2. When terminating, just insert the incoming optical fiber or indoor optical fiber into the mechanical connection mechanism without using other tools. The termination process takes only about 2 minutes, which greatly saves installation time.

3. The inner rings and end faces of the optical fiber quick connector are pre-ground and pre-polished before leaving the factory. A mechanical connection is located at the end of the ring to secure the inserted optical fiber.

4. The mechanical connection mechanism is mainly composed of V-shaped slots and clamping elements; When you need to insert an optical fiber, open the V-shaped slot with a wedge clip to facilitate the smooth insertion of the optical fiber.

5. After the optical fiber is inserted and secured, remove the wedge clip from the V-shaped slot.

din 41612 type g connectors https://www.kujunconnector.com/TYPE-G-Connectors